Most common failures | No# failures |
---|
Headlamp aim out of alignment | 44 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 33 |
Rear reflector on motorcycle missing |1.4.1| | 29 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 28 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 28 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 27 |
Steering headbearing has excessive free play |2.2.2| | 25 |
Registration plate issues | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Exhaust is leaking and excessively noisey |7.1.1b| | 14 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 13 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
Horn not working |1.7.3a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 8 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 7 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 6 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 4 |
Rear wheel insecure |4.2.3b| | 4 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Handlebar mounting clamp loose |2.1.1a| | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 3 |
Nearside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp aim not tested |1.6| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front suspension assembly component excessively corroded. |2.3.1| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Brake caliper|s| insecure |3.2.A1j| | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 3 |
Nearside Steering lock stop ineffective |2.1.3| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Nearside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Direction indicator not working |1.5.1c| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Offside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Direction indicator not working |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Nearside Steering lock stop maladjusted |2.1.3| | 2 |
Front suspension assembly component excessively misaligned |2.3.1| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Nearside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Outer Horn not working |1.7.3a| | 1 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Front Brake component has an inadequate repair |3.1.5| | 1 |
Upper Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Brake master cylinder defective but brake still operating window sight very deterated (1.1.10 (b) (i)) | 1 |
Rear Position lamp likely to become detached lens (4.2.1 (c) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Motorcycle structure cracked |6.1.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Brake lever attachment screws loose |3.1.2b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
An item not tested |Manual| | 1 |
Upper Brake lever excessively damaged |3.2.A1c| | 1 |
Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on side light |1.1.3a| | 1 |
Nearside Indicator switch defective |1.5.4| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Brake component has restricted free movement and operation is likely to be impeded front pads worn uneven |3.2.A1h| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Nearside Front Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Lower Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Lower Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Fuel cap ineffective no seal (6.1.3 (b) (i)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle sticking on (6.2.7 (a) (ii)) | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Centre Steering lock stop ineffective |2.1.3| | 1 |
Offside Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Centre Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Offside Front Position lamp switch faulty |1.1.4a| | 1 |
Nearside Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Centre Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Centre Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Outer Front Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
Nearside Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Offside Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Brake performance not tested |3.3| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Brake cylinder damaged (1.1.16 (a) (i)) | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Centre Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Motorcycle structure excessively distorted |6.1.1a| | 1 |
Nearside Fuel system component insecure Airbox. |7.2.1b| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure. |2.3.8| | 1 |
Offside Front Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure. |2.3.8| | 1 |
Outer Front Upper Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Front Lower Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Upper Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Upper Indicator switch defective |1.5.4| | 1 |
Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
Forks excessively corroded (2.2.2 (d) (i)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Handlebar mounting insecure loose (2.2.1 (a) (i)) | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Brake lever has inadequate reserve travel rear brake low effort |3.1.3b| | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Lower Fork yoke deformed |2.1.1b| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Central Rear Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Central Rear Steering lock stop ineffective fork legs make contact with the fairing and rear of headlamp |2.1.3| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Fuel pipe leaking |7.2.1a| | 1 |
Front Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |