Most common failures | No# failures |
---|
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Headlamp aim out of alignment | 4 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
All position lamps light intensity significantly reduced all lights adversely affected by the operation of indicators |4.2.3 |a| |ii|| | 1 |
An item not tested |Manual| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp insecure |1.2.3b| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Nearside Suspension arm pin or bush excessively worn engine to frame mount bush (5.3.4 (a) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Fuel cap ineffective seal perished and split |6.1.3 |b| |i|| | 1 |
Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Central Front Steering headbearing has excessive free play |2.2.2| | 1 |