>

MOT History from tests of petrol KAWASAKI ZZR600s year 1999

Review the list of common KAWASAKI ZZR600 failures below or to perform a specific mot history check on your KAWASAKI then use our popular KnowYourCar service

mot history
Pass percent:83.99%
(The average a petrol KAWASAKI ZZR600 year 1999 passes without issue)
Based on:6,132 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment77
Front Roller brake test indicates a binding brake |3.3.A1a|75
Registration plate lamp issues52
Registration plate issues48
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|40
Drive chain excessively loose |6.2.1d|39
Exhaust is leaking and excessively noisey |7.1.1b|35
Rear Roller brake test indicates a binding brake |3.3.A1a|35
Throttle operating incorrectly |6.2.1f|30
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|26
Stop lamp does not illuminate immediately a brake applies |1.3.1a|24
Front Floor brake test indicates a binding brake |3.3.C2c|22
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|19
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|19
Front Brake excessively binding (1.2.1 (f))19
Nearside Front Brake disc|s| cracked |3.2.A1g|17
Offside Front Brake disc|s| cracked |3.2.A1g|16
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|15
Headlamp aim beam image kick up to the offside |1.6|12
Rear wheel bearings have excessive free play |2.4.A.2c|12
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||11
Drive chain worn to excess |6.2.1e|11
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|11
Offside Front shock absorber seal failed and leaking oil |2.3.3|11
Front Floor brake test indicates a sticking brake |3.3.C2c|11
Front Stop lamp not working (4.3.1 (a) (ii))11
Front position lamp does not illuminate immediately when switched on |1.1.3a|10
Front Roller brake test indicates a sticking brake |3.3.A1a|10
Nearside Front shock absorber seal failed and leaking oil |2.3.3|10
Rear Brake excessively binding (1.2.1 (f))10
Drive chain excessively tight |6.2.1d|9
Rear Roller brake test indicates a sticking brake |3.3.A1a|9
Rear wheel spindle securing nut locking device missing |2.4.A.2b|9
Offside Handlebar deformed |2.1.1b|8
Rear Floor brake test indicates a binding brake |3.3.C2c|8
Rear Hydraulic brake control feels spongy |3.1.4a|8
Rear Drive chain excessively loose |6.2.1d|8
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))8
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||7
Front wheel bearings have excessive free play |2.3.5b|7
Front Brake disc|s| cracked |3.2.A1g|7
Front Brake lever has inadequate reserve travel |3.1.3b|7
Throttle operating incorrectly (6.2.7 (a) (i))7
Front Brake disc|s| has excessive run out |3.2.A1m|6
An item not tested |Manual|6
Rear Drive chain sprocket worn to excess |6.2.1e|6
Exhaust excessively deteriorated |7.1.1a|6
Drive chain sprocket carrier worn to excess |6.2.1e|6
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|6
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|6
Rear Brake pedal has inadequate reserve travel |3.1.3b|6
Drive chain excessively loose |6.1.7 |c| |i||6
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Nearside Front Footrest insecure |6.2.1a|5
Offside Front Footrest insecure |6.2.1a|5
Front Hydraulic brake control feels spongy |3.1.4a|5
Front Exhaust is leaking and excessively noisey |7.1.1b|5
Riders seat insecure |6.2.1a|5
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|5
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|5
Steering headbearing has excessive free play |2.2.2|5
Front Wheel has an excessively distorted bead rim. |4.2.2|5
Wheel alignment incorrect which adversely affects the handling |2.5.1|4
Rear Rear wheel bearings have excessive free play |2.4.A.2c|4
Front Plate brake test indicates a binding brake |3.3.B1a|4
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Front Brake disc|s| is excessively distorted |3.2.A1m|4
Horn not working |1.7.3a|4
Brake pedal has inadequate reserve travel |3.1.3b|4
Brake performance not tested |3.3|4
Front Brake excessively binding |1.2.1 |f||4
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|4
Stop lamp remains on when the brakes are released4
Nearside Front Brake disc fractured (1.1.14 (a) (ii))4
Rear Valve stem seriously damaged (5.2.3 (j))4
Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b))4
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))4
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Front Headlamp aim beam image kick up to the offside |1.6|3
Rear Brake disc|s| has excessive run out |3.2.A1m|3
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Rear Drive chain worn to excess |6.2.1e|3
Lower Exhaust is leaking and excessively noisey |7.1.1b|3
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|3
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|3
Front Brake lever cannot be applied smoothly |3.1.3d|3
Front Front shock absorber seal failed and leaking oil |2.3.3|3
Front shock absorber seal failed and leaking oil |2.3.3|3
Rear Direction indicators not working |1.5.1c|3
Floor brake test indicates a binding brake |3.3.C2c|3
Rear Floor brake test indicates a sticking brake |3.3.C2c|3
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|3
Front Steering headbearing has excessive free play |2.2.2|3
Rear Brake disc|s| excessively worn |3.2.A1l|3
Direction indicators not working |1.5.1c|3
Front Horn not working |1.7.3a|3
Rear reflector on motorcycle missing |1.4.1|3
Rear Brake performance not tested |3.3|3
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Rear Brake pedal has insufficient reserve travel |1.1.2 |a||3
Rear reflector missing (4.8.2 (a) (ii))3
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Front Valve stem seriously damaged (5.2.3 (j))3
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))3
Drive chain excessively loose (6.1.7 (c) (i))3
Front brake disc in such a condition that it is seriously weakened3

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy