Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Headlamp aim out of alignment | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Throttle operating incorrectly |6.2.1f| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Rear Front wheel spindle loose |2.3.5a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Registration plate lamp issues | 1 |
Rear Wheel fixing missing (multiple fixings) Axle split pin missing (5.2.1 (a) (i)) | 1 |