| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Brake hose excessively deteriorated | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Stop lamp does not illuminate immediately a brake applies when front brake applied |1.3.1a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on number plate light |1.1.3a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Lower Exhaust has a major leak of exhaust gases Corroded through. (6.1.2 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Position lamp not working Bulb out. (4.2.1 (a)) | 1 |
| Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Stop lamp not working on rear foot brake (4.3.1 (a) (ii)) | 1 |
| Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Front Dipswitch does not operate immediately when selected on dipped beam Low Beam (4.1.3 (b)) | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |