>

MOT History from tests of petrol KAWASAKI ZZR1100s year 1990

Review the list of common KAWASAKI ZZR1100 failures below or to perform a specific mot history check on your KAWASAKI then use our popular KnowYourCar service

mot history
Pass percent:76.30%
(The average a petrol KAWASAKI ZZR1100 year 1990 passes without issue)
Based on:789 MOT Tests
Most common failuresNo# failures
Registration plate issues18
Headlamp aim out of alignment16
Front Roller brake test indicates a binding brake |3.3.A1a|15
Rear Roller brake test indicates a binding brake |3.3.A1a|13
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|10
Throttle operating incorrectly |6.2.1f|8
Front position lamp does not illuminate immediately when switched on |1.1.3a|8
Nearside Front shock absorber seal failed and leaking oil |2.3.3|8
Rear reflector on motorcycle missing |1.4.1|8
Rear Brake disc|s| cracked |3.2.A1g|7
Drive chain excessively loose |6.2.1d|6
Horn not working |1.7.3a|5
Offside Front shock absorber seal failed and leaking oil |2.3.3|4
Front Brake lever has inadequate reserve travel |3.1.3b|4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|4
Rear Floor brake test indicates a binding brake |3.3.C2c|3
Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Rear shock absorber seal failed and leaking oil |2.4.A.1c|3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Drive chain excessively tight |6.2.1d|3
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Direction indicators not working |1.5.1c|3
Rear Stop lamp remains on when the brake is released |1.3.1e|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Rear Rear reflector on motorcycle missing |1.4.1|3
Front Floor brake test indicates a binding brake |3.3.C2c|2
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
Drive chain sprocket carrier worn to excess |6.2.1e|2
Offside Front Throttle operating incorrectly |6.2.1f|2
Stop lamp remains on when the brake is released |1.3.1e|2
Indicator tell tale not functioning |1.5.2|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Front position lamp incorrect colour |1.1.2a|2
Rear position lamp insecure |1.1.1c|2
Nearside Rear Direction indicators not working |1.5.1c|2
Offside Front Brake disc|s| excessively worn |3.2.A1l|2
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Rear Drive chain excessively loose |6.2.1d|2
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Front Floor brake test indicates a sticking brake |3.3.C2c|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Front An item not tested |Manual|1
An item not tested |Manual|1
Nearside Front Brake disc|s| has excessive run out |3.2.A1m|1
Offside Front Brake disc|s| has excessive run out |3.2.A1m|1
Nearside Rear Footrest missing |6.2.1a|1
Offside Rear Footrest missing |6.2.1a|1
Front Headlamp aim beam image kick-up is to the offside |1.6.1|1
Nearside Front Roller brake test indicates a sticking brake |3.3.A1a|1
Offside Front Roller brake test indicates a sticking brake |3.3.A1a|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Upper Horn not loud enough to be heard by another road user |1.7.3a|1
Centre Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a|1
Nearside Front Footrest insecure |6.2.1a|1
Centre Drive chain fouling another component |6.2.1d|1
Rear mono-shock pivot excessively worn |2.4.B.4|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Riders seat insecure |6.2.1a|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Horn is not a constant note |1.7.3c|1
Central Front Front shock absorber seal failed and leaking oil o/s fork seal leaking badly |2.3.3|1
Central Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Drive chain worn to excess |6.2.1e|1
Rear suspension bearing has excessive free play Swing Arm bearing has excess freeplay |2.4.A2a|i||1
Nearside Roller brake test indicates a binding brake |3.3.A1a|1
Offside Roller brake test indicates a binding brake |3.3.A1a|1
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Rear Rear suspension bearing has excessive free play |2.4.A2a|i||1
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Centre Lower Rear suspension bearing has excessive free play |2.4.A2a|i||1
Front position lamp insecure |1.1.1c|1
Rear Brake disc|s| excessively scored |3.2.A1l|1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Front Motorcycle structure cracked |6.1.1a|1
Front Valve stem seriously damaged |5.2.3 |j||1
Rear Valve stem seriously damaged |5.2.3 |j||1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Brake hose excessively deteriorated1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Nearside Front Brake disc|s| excessively worn |3.2.A1l|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Front Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Offside Front Brake disc|s| insecure security washers broken up and missing |3.2.A1g|1
Front Steering lock stop maladjusted |2.1.3|1
Front Throttle operating incorrectly |6.2.1f|1
Front Brake lever has insufficient reserve travel |1.1.2 |a||1
Front Position lamp not working |4.2.1 |a||1
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Brake lever insecure |3.1.2a|1
Front Steering control handlebar movement restricted by taut cables |2.1.2c|1
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d|1
Steering control handlebar movement restricted by taut cables |2.1.2c|1
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Nearside Handlebar deformed |2.1.1b|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Nearside Front Direction indicators not working |1.5.1c|1
Rear Drive chain excessively tight |6.2.1d|1
Rear suspension component loose |2.4.A.1a|1
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Handlebar mounting clamp bolt loose |2.1.1a|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Offside Throttle operating incorrectly |6.2.1f|1
Offside Rear Brake pipe excessively chafed |3.2.B2a|1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Front Horn not working |1.7.3a|1
Front suspension has inadequate damping effect. |2.3.6c|1
Horn control defective |1.7.2a|1
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Rear Direction indicator not working |1.5.1c|1
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d|1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Rear Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Steering headbearing has excessive free play |2.2.2|1
Rear Brake pipe union leaking fluid |3.2.B4|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Exhaust excessively deteriorated |7.1.1a|1
Rear Brake cylinder severely corroded |3.2.B1b|1
Rear Drive chain worn to excess |6.2.1e|1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Brake performance not tested |3.3|1
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Stop lamp does not illuminate immediately a brake applies from rear brake |1.3.1a|1
Front wheel bearings are excessively rough |2.3.5b|1
Front wheel bearings have excessive free play |2.3.5b|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Horn not working (7.7 (a) (ii))1
Rear Valve stem seriously damaged (5.2.3 (j))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Rear Position lamp not working (4.2.1 (a))1
Steering operation restricted in free movement from lock to lock (2.1.4 (c))1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Drive chain worn to excess (6.1.7 (c) (i))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Front Brake excessively binding (1.2.1 (f))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy