Most common failures | No# failures |
---|
Headlamp aim out of alignment | 12 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 6 |
Drive chain excessively loose |6.2.1d| | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Registration plate lamp issues | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front mudguard insecure |2.3.7| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Nearside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Inner Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Lower Rear suspension bush excessively deteriorated link bush |2.4.A2a|i|| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Direction indicators affected by the operation of another lamp rear |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Steering lock stop maladjusted |2.1.3| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Exhaust excessively deteriorated both |7.1.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Nearside Rear Wheel fixing missing (single fixing) nut split pin missing (5.2.1 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Central Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Offside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Rear Brake clevis joint excessively worn (1.1.15 (b)) | 1 |
Offside Rear Brake hose bulging under pressure (1.1.12 (d)) | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls replaced front brake light switch as didnt illuminate brake light (4.3.2 (a) (iii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |