| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
| Registration plate issues | 10 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Drive chain excessively loose |6.2.1d| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Registration plate lamp issues | 5 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Horn not working |1.7.3a| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Front Throttle operating incorrectly |6.2.1f| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Brake excessively binding |1.2.1 |f|| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Offside Front Horn not working |1.7.3a| | 1 |
| Offside Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Centre Front Lower Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Brake cylinder severely damaged |3.2.B1b| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
| Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Front Lower Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Brake disc|s| insecure |3.2.A1g| | 1 |
| Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Nearside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Lower Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Stop lamp does not illuminate immediately a brake applies front |1.3.1a| | 1 |
| Stop lamp remains on when the brake is released rear |1.3.1e| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Position lamp missing |4.2.1 |a|| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp does not illuminate immediately a brake applies Does not illuminate when front brake is pressed |1.3.1a| | 1 |
| Front mudguard insecure movement in front mudguard on its mounting |2.3.7| | 1 |
| Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front Brake performance not tested |1.2.1 |g|| | 1 |
| Rear Brake performance not tested |1.2.1 |g|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Stop lamp does not illuminate immediately a brake applies Rear brake lever |1.3.1a| | 1 |
| Brake hose damaged | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on number plate light not working |1.1.3a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear All position lamps do not illuminate immediately when switched on NUMBER PLATE LIGHT |1.1.3a| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake pivot has restricted free movement (1.1.15 (e)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Stop lamp not working brake lever fault on switch (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp switch with a delay in operation in-op (4.3.2 (a) (ii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Steering operation impeded by a fairing clutch lever hits fairing (2.1.4 (e)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |