| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 31 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
| Registration plate issues | 12 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Registration plate lamp issues | 10 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 8 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 7 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Front Brake disc|s| cracked |3.2.A1g| | 4 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Front mudguard insecure |2.3.7| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Nearside Rear Exhaust mounting missing |7.1.1c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front Steering lock stop ineffective |2.1.3| | 1 |
| Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Stop lamp does not illuminate immediately a brake applies front control |1.3.1a| | 1 |
| Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Throttle operating incorrectly on right hand lock |6.2.1f| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Front An item not tested |Manual| | 1 |
| Rear Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake component is excessively corroded |3.1.5| | 1 |
| Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Throttle operating incorrectly throttle sticks & does not return to throttle stop |6.2.1f| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies does not illuminate unless pressed excessively & needs adjusting |1.3.1a| | 1 |
| Front Brake disc|s| has excessive run out brake tester indicates warped front brake disc |3.2.A1m| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Horn not working |1.7.3a| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Offside Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Lower Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Centre Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
| Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
| Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Front wheel bearings are excessively tight |2.3.5b| | 1 |
| Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Front Brake lever has insufficient reserve travel adjusted the lever. it is on its maximum (1.1.2 (a)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Steering operation linkage fouling when handlebars turned from lock to lock hand gaurd hit fairing (2.1.4 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Footrest missing Both rear (6.2.12 (a)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Clutch lever bent so it cannot be readily operated Bent & fouls fairing on N/S lock (6.2.7 (b)) | 1 |
| Front Wheel alignment incorrect which adversely affects the handling Suspected front forks bent (2.4 (a)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Shock absorber has an excessively worn bush linkage (5.3.2 (c)) | 1 |
| Offside Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Lower Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |