| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 31 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 24 |
| Registration plate issues | 20 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Drive chain excessively loose |6.2.1d| | 7 |
| Registration plate lamp issues | 6 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Front wheel bearings are excessively rough |2.3.5b| | 5 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
| Horn not working |1.7.3a| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Front Brake excessively binding (1.2.1 (f)) | 5 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear suspension component loose |2.4.A.1a| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Suspension arm pin or bush excessively worn swig arm slight play in bushes |5.3.4 |a| |i|| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Headlamp aim not tested headlight not working |1.6| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Brake reaction bracket excessively worn |1.1.15 |b|| | 1 |
| Nearside Front Brake locking device insecure |3.2.A1e| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Front suspension assembly component loose |2.3.1| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Rear Upper Footrest insecure |6.2.1a| | 1 |
| Nearside Front Lower Footrest missing |6.2.1a| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Rear Brake performance not tested |1.2.1 |g|| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Fork yoke cracked |2.1.1b| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Front Brake grabbing severely front brake notchy |1.2.1 |c|| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Outer Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Upper Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Offside Rear Brake caliper insecure Torque Arm Bolt Loose |1.1.16 |c| |i|| | 1 |
| Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Outer Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front An item not tested |Manual| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Wheel bearing has excessive play Front |5.1.3 |a| |i|| | 1 |
| Wheel bearing rough when rotated Front |5.1.3 |b| |i|| | 1 |
| Drive chain worn to excess Drive chain tight and siezed links |6.1.7 |c| |i|| | 1 |
| Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Centre Front Lower Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| An item not tested |Manual| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Nearside Front Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Offside Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working from front brake (4.3.1 (a) (ii)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork leg (5.3.2 (b)) | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Throttle operating incorrectly throttle sticking (6.2.7 (a) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Headlamp light intensity severely reduced dip and main (4.1.4 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Brake master cylinder insecure (1.1.10 (c)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Central Front Lower Horn not working (7.7 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Stop lamp not working with front control (4.3.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak fork leg (5.3.2 (b)) | 1 |
| Headlamp incorrect colour (4.1.4 (a)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Rear Brake caliper leaking (1.1.16 (b) (i)) | 1 |
| Rear Brake cylinder insecurely mounted and braking performance affected master (1.1.16 (c) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |