Most common failures | No# failures |
---|
Headlamp aim out of alignment | 52 |
Rear reflector on motorcycle missing |1.4.1| | 34 |
Registration plate issues | 26 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 19 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Front wheel bearings are excessively rough |2.3.5b| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Horn not working |1.7.3a| | 9 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Throttle operating incorrectly |6.2.1f| | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Offside Front Direction indicator insecure |1.5.3b| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
Nearside Front Footrest insecure |6.2.1a| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Nearside Handlebar deformed |2.1.1b| | 4 |
Front Horn not working |1.7.3a| | 4 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Brake hose excessively deteriorated | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Offside Handlebar deformed |2.1.1b| | 3 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Nearside Front Direction indicator insecure |1.5.3b| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Nearside Footrest insecure |6.2.1a| | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Offside Front Brake component is severely distorted |3.1.5| | 2 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Nearside Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Nearside Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
Offside Headlamp deteriorated and function impaired |1.2.3a| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Front Direction indicator missing |1.5.1a| | 2 |
Offside Direction indicator not working |1.5.1c| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Offside Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Offside Outer Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Nearside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Rear Lower Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Nearside Front Brake component is severely distorted |3.1.5| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Horn missing |1.7.1| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Stop lamp not working Front switch |4.3.1 |a| |ii|| | 1 |
Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Direction indicator light intensity significantly reduced Front |4.4.3 |a|| | 1 |
Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Fuel cap missing unable to open fuel cap |7.2.2a| | 1 |
Rear Brake cylinder severely corroded |3.2.B1b| | 1 |
Rear Brake component is severely distorted |3.1.5| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Lower Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Front Lower Footrest insecure |6.2.1a| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Centre Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Centre Front Drive chain worn to excess |6.2.1e| | 1 |
Centre Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front wheel bearings are excessively tight |2.3.5b| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Offside Front Handlebar deformed |2.1.1b| | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Horn control defective |1.7.2a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front An item not tested |Manual| | 1 |
Rear An item not tested |Manual| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Centre Rear Drive chain excessively loose |6.2.1d| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Exhaust markings indicating not for road use or similar wording silencer |7.1.4| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Stop lamp does not illuminate immediately a brake applies front brake light not working |1.3.1a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering front brake hose fouling instrument cluster when turned on left lock |2.1.2a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering handlebar fouls fairing frame/bracket on right lock |2.1.2a| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering wiring loom trapped by right hand front fork on right lock |2.1.2a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Front Front position lamp insecure |1.1.1c| | 1 |
Offside Front position lamp insecure |1.1.1c| | 1 |
Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Offside Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Front suspension assembly component loose |2.3.1| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Offside Front Brake component has an inadequate repair |3.1.5| | 1 |
Nearside Front Brake component has an inadequate repair |3.1.5| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Front All direction indicators incorrect colour (4.4.3 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Offside Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected on lock to lock check (6.2.7 (a) (ii)) | 1 |
Fork yoke insecure (2.2.2 (d) (i)) | 1 |