MOT History from tests of petrol KAWASAKI ZXR400s year 1991

Review the list of common KAWASAKI ZXR400 failures below or to perform a specific mot history check on your KAWASAKI then use our popular KnowYourCar service

mot history

Pass percent:69.36%

(The average a petrol KAWASAKI ZXR400 year 1991 passes without issue)

Based on:1,746 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	101
Registration plate issues	57
Rear reflector on motorcycle missing \|1.4.1\|	53
Drive chain excessively loose \|6.2.1d\|	23
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	23
Front Roller brake test indicates a binding brake \|3.3.A1a\|	21
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	16
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	15
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Steering headbearing has excessive free play \|2.2.2\|	14
Throttle operating incorrectly \|6.2.1f\|	13
Exhaust is leaking and excessively noisey \|7.1.1b\|	13
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	13
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	12
Rear Rear reflector on motorcycle missing \|1.4.1\|	12
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	12
Rear wheel bearings have excessive free play \|2.4.A.2c\|	12
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	12
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	11
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	11
Front Brake lever has inadequate reserve travel \|3.1.3b\|	11
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	11
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	11
Horn not working \|1.7.3a\|	11
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	11
Front Hydraulic brake control feels spongy \|3.1.4a\|	10
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	10
Drive chain worn to excess \|6.2.1e\|	10
Drive chain excessively tight \|6.2.1d\|	9
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	9
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	8
Rear Drive chain sprocket worn to excess \|6.2.1e\|	8
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	7
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	7
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	7
Front wheel bearings have excessive free play \|2.3.5b\|	7
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Nearside Front Direction indicator not working \|1.5.1c\|	7
Drive chain sprocket carrier worn to excess \|6.2.1e\|	7
Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	7
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	7
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	6
Riders seat insecure \|6.2.1a\|	6
Horn not loud enough to be heard by another road user \|1.7.3a\|	6
Steering control handlebar movement restricted by taut cables \|2.1.2c\|	6
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	6
Nearside Rear Direction indicator not working \|1.5.1c\|	6
Front wheel bearings are excessively rough \|2.3.5b\|	6
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	6
Nearside Front Footrest insecure \|6.2.1a\|	6
Offside Front Footrest insecure \|6.2.1a\|	6
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Exhaust excessively deteriorated \|7.1.1a\|	5
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	5
Offside Front Direction indicators not working \|1.5.1c\|	5
Headlamp aim not tested \|1.6\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	5
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Brake hose excessively deteriorated	4
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Front Steering headbearing has excessive free play \|2.2.2\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Registration plate lamp issues	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Front Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	4
Offside Handlebar deformed \|2.1.1b\|	4
Offside Front Handlebar deformed \|2.1.1b\|	4
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	4
Nearside Rear Direction indicator damaged and function impaired \|1.5.3a\|	4
Rear Drive chain sprocket carrier worn to excess \|6.2.1e\|	4
Rear Brake excessively binding (1.2.1 (f))	4
Front Brake excessively binding (1.2.1 (f))	4
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Stop lamp remains on when the brake is released \|1.3.1e\|	3
Nearside Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	3
Offside Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	3
Direction indicators not working \|1.5.1c\|	3
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Front Wheel has an excessively eccentric bead rim. \|4.2.2\|	3
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Offside Rear Direction indicator obscured \|1.5.1a\|	3
Headlamp aim beam image kick up to the offside \|1.6\|	3
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Indicator tell tale not functioning \|1.5.2\|	3
Nearside Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	3
Nearside Front Direction indicator insecure \|1.5.3b\|	3
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Nearside Front Direction indicators not working \|1.5.1c\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Offside Rear Brake pipe inadequately supported \|3.2.B2b\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	3
Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	3
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Rear Brake locking device missing \|3.2.A1e\|	3
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Offside Front Direction indicator insecure \|1.5.3b\|	3
Rear reflector missing (4.8.2 (a) (ii))	3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	3
Headlamp insecure \|1.2.3b\|	2
An item not tested \|Manual\|	2
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Front Brake pipe likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	2
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Front Brake excessively binding \|1.2.1 \|f\|\|	2
Nearside Rear Direction indicator insecure \|1.5.3b\|	2
Rear Rear wheel bearings are excessively rough \|2.4.A.2c\|	2
Offside Rear Lower Roller brake test indicates a binding brake \|3.3.A1a\|	2
Rear Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	2
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Rear Footrest missing \|6.2.1a\|	2
Steering movement excessively rough with the weight on the lower bearing \|2.2.1a\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Lower Steering headbearing has excessive free play \|2.2.2\|	2
Rear Direction indicators not working \|1.5.1c\|	2
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Front Horn not working \|1.7.3a\|	2
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Front Steering control handlebar movement restricted by taut cables \|2.1.2c\|	2
Nearside Indicator tell tale not functioning \|1.5.2\|	2
Roller brake test indicates a severely juddering brake \|3.3.A1b\|	2
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Front Floor brake test indicates a binding brake \|3.3.C2c\|	2
Front Drive chain sprocket worn to excess \|6.2.1e\|	2
Nearside Rear Footrest missing \|6.2.1a\|	2
Offside Rear Footrest missing \|6.2.1a\|	2
Offside Direction indicators not working \|1.5.1c\|	2
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Fuel hose leaking \|7.2.1a\|	2
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Offside Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	2
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Seat insecure \|6.2.1a\|	2
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	2
Rear Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Offside Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Offside Rear Direction indicator damaged and function impaired \|1.5.3a\|	2
Nearside Rear Direction indicator obscured \|1.5.1a\|	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	2
Offside Front Motorcycle structure cracked \|6.1.1a\|	2
Horn control defective \|1.7.2a\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Offside Rear Direction indicator insecure \|1.5.3b\|	2
Brake hose damaged	2
Front Front mudguard insecure \|2.3.7\|	2
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Clutch lever positioned so it cannot be readily operated. \|6.2.1g\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	2
Front Valve stem seriously damaged (5.2.3 (j))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	101
Registration plate issues	57
Rear reflector on motorcycle missing \|1.4.1\|	53
Drive chain excessively loose \|6.2.1d\|	23
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	23
Front Roller brake test indicates a binding brake \|3.3.A1a\|	21
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	16
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	15
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Steering headbearing has excessive free play \|2.2.2\|	14
Throttle operating incorrectly \|6.2.1f\|	13
Exhaust is leaking and excessively noisey \|7.1.1b\|	13
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	13
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	12
Rear Rear reflector on motorcycle missing \|1.4.1\|	12
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	12
Rear wheel bearings have excessive free play \|2.4.A.2c\|	12
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	12
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	11
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	11
Front Brake lever has inadequate reserve travel \|3.1.3b\|	11
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	11
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	11
Horn not working \|1.7.3a\|	11
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	11
Front Hydraulic brake control feels spongy \|3.1.4a\|	10
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	10
Drive chain worn to excess \|6.2.1e\|	10
Drive chain excessively tight \|6.2.1d\|	9
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	9
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	8
Rear Drive chain sprocket worn to excess \|6.2.1e\|	8
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	7
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	7
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	7
Front wheel bearings have excessive free play \|2.3.5b\|	7
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Nearside Front Direction indicator not working \|1.5.1c\|	7
Drive chain sprocket carrier worn to excess \|6.2.1e\|	7
Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	7
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	7
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	6
Riders seat insecure \|6.2.1a\|	6
Horn not loud enough to be heard by another road user \|1.7.3a\|	6
Steering control handlebar movement restricted by taut cables \|2.1.2c\|	6
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	6
Nearside Rear Direction indicator not working \|1.5.1c\|	6
Front wheel bearings are excessively rough \|2.3.5b\|	6
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	6
Nearside Front Footrest insecure \|6.2.1a\|	6
Offside Front Footrest insecure \|6.2.1a\|	6
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Exhaust excessively deteriorated \|7.1.1a\|	5
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	5
Offside Front Direction indicators not working \|1.5.1c\|	5
Headlamp aim not tested \|1.6\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	5
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Brake hose excessively deteriorated	4
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Front Steering headbearing has excessive free play \|2.2.2\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Registration plate lamp issues	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Front Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	4
Offside Handlebar deformed \|2.1.1b\|	4
Offside Front Handlebar deformed \|2.1.1b\|	4
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	4
Nearside Rear Direction indicator damaged and function impaired \|1.5.3a\|	4
Rear Drive chain sprocket carrier worn to excess \|6.2.1e\|	4
Rear Brake excessively binding (1.2.1 (f))	4
Front Brake excessively binding (1.2.1 (f))	4
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Stop lamp remains on when the brake is released \|1.3.1e\|	3
Nearside Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	3
Offside Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	3
Direction indicators not working \|1.5.1c\|	3
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Front Wheel has an excessively eccentric bead rim. \|4.2.2\|	3
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Offside Rear Direction indicator obscured \|1.5.1a\|	3
Headlamp aim beam image kick up to the offside \|1.6\|	3
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	3
Offside Front Direction indicator not working \|1.5.1c\|	3
Indicator tell tale not functioning \|1.5.2\|	3
Nearside Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	3
Nearside Front Direction indicator insecure \|1.5.3b\|	3
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Nearside Front Direction indicators not working \|1.5.1c\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Offside Rear Brake pipe inadequately supported \|3.2.B2b\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	3
Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	3
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Rear Brake locking device missing \|3.2.A1e\|	3
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Offside Front Direction indicator insecure \|1.5.3b\|	3
Rear reflector missing (4.8.2 (a) (ii))	3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	3
Headlamp insecure \|1.2.3b\|	2
An item not tested \|Manual\|	2
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Front Brake pipe likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	2
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	2
Front Brake excessively binding \|1.2.1 \|f\|\|	2
Nearside Rear Direction indicator insecure \|1.5.3b\|	2
Rear Rear wheel bearings are excessively rough \|2.4.A.2c\|	2
Offside Rear Lower Roller brake test indicates a binding brake \|3.3.A1a\|	2
Rear Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	2
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Rear Footrest missing \|6.2.1a\|	2
Steering movement excessively rough with the weight on the lower bearing \|2.2.1a\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Lower Steering headbearing has excessive free play \|2.2.2\|	2
Rear Direction indicators not working \|1.5.1c\|	2
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Front Horn not working \|1.7.3a\|	2
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Front Steering control handlebar movement restricted by taut cables \|2.1.2c\|	2
Nearside Indicator tell tale not functioning \|1.5.2\|	2
Roller brake test indicates a severely juddering brake \|3.3.A1b\|	2
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Front Floor brake test indicates a binding brake \|3.3.C2c\|	2
Front Drive chain sprocket worn to excess \|6.2.1e\|	2
Nearside Rear Footrest missing \|6.2.1a\|	2
Offside Rear Footrest missing \|6.2.1a\|	2
Offside Direction indicators not working \|1.5.1c\|	2
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Fuel hose leaking \|7.2.1a\|	2
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Offside Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	2
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Seat insecure \|6.2.1a\|	2
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	2
Rear Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Offside Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Offside Rear Direction indicator damaged and function impaired \|1.5.3a\|	2
Nearside Rear Direction indicator obscured \|1.5.1a\|	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	2
Offside Front Motorcycle structure cracked \|6.1.1a\|	2
Horn control defective \|1.7.2a\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Offside Rear Direction indicator insecure \|1.5.3b\|	2
Brake hose damaged	2
Front Front mudguard insecure \|2.3.7\|	2
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Clutch lever positioned so it cannot be readily operated. \|6.2.1g\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	2
Front Valve stem seriously damaged (5.2.3 (j))	2

MOT History from tests of petrol KAWASAKI ZXR400s year 1991

Find us on Facebook