MOT History from tests of petrol KAWASAKI ZXRs year 2000

Review the list of common KAWASAKI ZXR failures below or to perform a specific mot history check on your KAWASAKI then use our popular KnowYourCar service

mot history

Pass percent:73.97%

(The average a petrol KAWASAKI ZXR year 2000 passes without issue)

Based on:73 MOT Tests

Most common failures	No# failures
Headlamp aim beam image kick up to the offside \|1.6\|	4
Registration plate issues	3
Front Headlamp aim beam image kick-up is to the offside \|1.6.1\|	2
Headlamp aim out of alignment	2
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	2
Front Direction indicator missing \|1.5.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Direction indicators not working both \|1.5.1c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front position lamp deteriorated and function impaired \|1.1.1b\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Front Direction indicators not working \|1.5.1c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Headlamp insecure \|1.2.3b\|	1
Front Brake fluid reservoir insecurely mounted \|3.2.B1a\|	1
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	1
Drive chain excessively loose \|6.2.1d\|	1
Drive chain worn to excess \|6.2.1e\|	1
Offside Rear Upper Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.6\|	1
Offside Headlamp aim beam image kick up to the offside \|1.6\|	1
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Front Front position lamp insecure \|1.1.1c\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Stop lamp does not emit a steady light \|1.3.1b\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Direction indicator obviously incorrectly positioned Both rear (4.4.3 (a))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim beam image kick up to the offside \|1.6\|	4
Registration plate issues	3
Front Headlamp aim beam image kick-up is to the offside \|1.6.1\|	2
Headlamp aim out of alignment	2
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	2
Front Direction indicator missing \|1.5.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Front Direction indicators not working both \|1.5.1c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front position lamp deteriorated and function impaired \|1.1.1b\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Front Direction indicators not working \|1.5.1c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Headlamp insecure \|1.2.3b\|	1
Front Brake fluid reservoir insecurely mounted \|3.2.B1a\|	1
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	1
Drive chain excessively loose \|6.2.1d\|	1
Drive chain worn to excess \|6.2.1e\|	1
Offside Rear Upper Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.6\|	1
Offside Headlamp aim beam image kick up to the offside \|1.6\|	1
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Front Front position lamp insecure \|1.1.1c\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Stop lamp does not emit a steady light \|1.3.1b\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Direction indicator obviously incorrectly positioned Both rear (4.4.3 (a))	1

MOT History from tests of petrol KAWASAKI ZXRs year 2000

Find us on Facebook