| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 30 |
| Registration plate issues | 24 |
| Rear reflector on motorcycle missing |1.4.1| | 23 |
| Horn not working |1.7.3a| | 11 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
| Headlamp aim beam image kick up to the offside |1.6| | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front position lamp incorrect colour |1.1.2a| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Horn sound not in accordance with requirements |7.7 |c|| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Brake hose damaged | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Offside Handlebar deformed |2.1.1b| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Throttle operating incorrectly sticking |6.2.1f| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Brake component is severely distorted |3.1.5| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Fork yoke deformed |2.1.1b| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Central Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Offside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear An item not tested |Manual| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Front Lower Brake disc|s| insecure Floating disk loose on bobbins |3.2.A1g| | 1 |
| Offside Front Lower Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front An item not tested |Manual| | 1 |
| Offside Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Rear Wheel fixing missing |single fixing| split pin missing |5.2.1 |a| |ii|| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake performance not tested |3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Headlamp light source and lamp not compatible hid kit fitted |4.1.4 |c|| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen beam kick up is to the off side |4.1.2 |a|| | 1 |
| Offside Front Indicator tell tale not functioning |1.5.2| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Stop lamp not working Front brake switch inoperative |4.3.1 |a| |ii|| | 1 |
| Offside Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
| Offside Handlebar restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Front Brake component is excessively corroded |3.1.5| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Exhaust mounting missing Spring Clip missing |7.1.1c| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Front Footrest missing |6.2.1a| | 1 |
| Central Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Wheel more than one fixing missing adjuster (5.2.1 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Brake clevis joint insecure (1.1.15 (c)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Nearside Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Central Front Outer Shock absorber has a serious fluid leak both fork seals blown (5.3.2 (b)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Wheel fixing loose (multiple fixings) Wheel Andjustment Bolt (5.2.1 (a) (i)) | 1 |
| Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |