Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Registration plate issues | 6 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Horn not working |1.7.3a| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Lower Steering control fouling between components which interferes with the free movement of the steering fork yoke fouls radiator mount |2.1.2a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Vehicle identification number not legible unable to find on frame |6.3.5a| | 1 |
Direction indicator not working all not working |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Registration plate lamp issues | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel system component leaking carburettors leaking |7.2.1a| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system silencer loose |7.1.1.c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Brake caliper leaking and braking performance affected Bleed nipple leaking (1.1.16 (b) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |