| Most common failures | No# failures |
|---|
| Registration plate issues | 12 |
| Rear reflector on motorcycle missing |1.4.1| | 8 |
| Headlamp aim out of alignment | 8 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Horn not working |1.7.3a| | 3 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Steering lock stop maladjusted |2.1.3| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Nearside Front Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Steering operation impeded by a fairing (2.1.4 (e)) | 1 |