| Most common failures | No# failures |
|---|
| Registration plate issues | 22 |
| Headlamp aim out of alignment | 21 |
| Rear reflector on motorcycle missing |1.4.1| | 20 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Registration plate lamp issues | 6 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Horn not working |1.7.3a| | 3 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Offside Front Direction indicator insecure |1.5.3b| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Brake hose stretched by suspension movement |3.2.B3b| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Motorcycle structure cracked |6.1.1a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| All direction indicators not working INDICATORS NOT FLASHING |4.4.1 |a| |ii|| | 1 |
| All direction indicators light intensity significantly reduced |4.4.3 |a|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Centre Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Brake pedal mounting insecure |3.1.2a| | 1 |
| Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Outer Front Upper Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake component is excessively corroded |3.1.5| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake opperated stop light |1.3.1a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Rear Brake hose fouling |3.2.B3b| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Shock absorber has a serious fluid leak Offside and nearside |5.3.2 |b|| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Footrest missing |6.2.1a| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Centre Front Upper Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Centre Front Upper Fuel system component leaking |7.2.1a| | 1 |
| Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Offside Front Motorcycle structure cracked |6.1.1a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Stop lamp does not illuminate immediately a brake applies both switches |1.3.1a| | 1 |
| Rear Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front Upper Front position lamp missing |1.1.1a| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Front All position lamps not working (4.2.1 (a)) | 1 |
| Throttle operating incorrectly sticking (6.2.7 (a) (i)) | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
| Stop lamp not working brake light not working on front leaver (4.3.1 (a) (ii)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock dash fowling on head lights (2.1.4 (b)) | 1 |
| Steering linkage locking device ineffective ignition lock insecure (2.1.3 (d)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |