| Most common failures | No# failures |
|---|
| Registration plate issues | 14 |
| Rear reflector on motorcycle missing |1.4.1| | 12 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Headlamp aim out of alignment | 6 |
| Registration plate lamp issues | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Horn not working |1.7.3a| | 2 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Direction indicator deteriorated and function impaired both indicators very dim |1.5.3a| | 1 |
| Rear Rear position lamp missing |1.1.1a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Stop lamp not working front and rear |4.3.1 |a| |ii|| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Throttle operating incorrectly throttle operating when turning left |6.2.7 |a| |i|| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Horn missing |1.7.1| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering front brake line |2.1.2a| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Throttle operating incorrectly sticking |6.2.1f| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Throttle operating incorrectly Sticking when in right hand lock |6.2.7 |a| |i|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Handlebar mounting clamp loose (2.1.1a) | 1 |
| Rear Stop lamp remains on when the brake is released (1.3.1e) | 1 |
| Offside Footrest insecure (6.2.1a) | 1 |
| Nearside Drive chain excessively loose (6.2.1d) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
| Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Front Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Position lamp not working rear position light (4.2.1 (a)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Offside Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |