Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 4 |
Headlamp aim out of alignment | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Horn not working |1.7.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Steering lock stop missing |2.1.3| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Registration plate lamp issues | 1 |
Offside Fuel system component leaking |6.1.3 |b| |i|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Upper Direction indicators not working |1.5.1c| | 1 |
Centre Rear Lower Rear suspension component seized |2.4A2a|ii|| | 1 |
Offside Rear Lower Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Rear Lower Hydraulic brake control feels spongy |3.1.4a| | 1 |
Outer Front Upper Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Brake hose excessively twisted |3.2.B3a| | 1 |
Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
Offside Brake pedal insecure |3.1.2a| | 1 |
Offside Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Centre Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Lower Brake component leaking fluid |3.2.B4| | 1 |
Offside Front Lower Brake component leaking fluid |3.2.B4| | 1 |
Offside Front Upper Brake component leaking fluid |3.2.B4| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Stop lamp not working not working on front brake |4.3.1 |a| |ii|| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Registration plate issues | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake cylinder severely corroded |3.2.B1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake hose leaking (1.1.12 (c)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |