Most common failures | No# failures |
---|
Registration plate issues | 88 |
Headlamp aim out of alignment | 51 |
Rear reflector on motorcycle missing |1.4.1| | 36 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 24 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 15 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 13 |
Drive chain excessively loose |6.2.1d| | 12 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 10 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 9 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Horn not working |1.7.3a| | 7 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Front Front wheel bearings have excessive free play |2.3.5b| | 6 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Registration plate lamp issues | 6 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
Nearside Front Footrest insecure |6.2.1a| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Offside Front Direction indicators not working |1.5.1c| | 4 |
Front Brake excessively binding |1.2.1 |f|| | 4 |
Headlamp incorrect colour |1.2.1| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Offside Front Direction indicator insecure |1.5.3b| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Nearside Rear Direction indicators not working |1.5.1c| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Rear Drive chain excessively tight |6.2.1d| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Nearside Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Exhaust mounting missing |7.1.1c| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Brake disc|s| cracked |3.2.A1g| | 2 |
Offside Brake disc|s| cracked |3.2.A1g| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Brake hose leaking fluid |3.2.B4| | 2 |
Brake performance not tested |3.3| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Footrest insecure |6.2.1a| | 2 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |