Most common failures | No# failures |
---|
Headlamp aim out of alignment | 90 |
Rear reflector on motorcycle missing |1.4.1| | 88 |
Registration plate issues | 70 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 29 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 26 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 25 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Drive chain excessively loose |6.2.1d| | 16 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 15 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 14 |
Rear Rear reflector on motorcycle missing |1.4.1| | 14 |
Registration plate lamp issues | 14 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 12 |
Headlamp aim beam image kick up to the offside |1.6| | 11 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 10 |
Throttle operating incorrectly |6.2.1f| | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Nearside Rear Direction indicator not working |1.5.1c| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Drive chain worn to excess |6.2.1e| | 9 |
Drive chain excessively tight |6.2.1d| | 8 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 8 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Nearside Rear Direction indicators not working |1.5.1c| | 8 |
Offside Front Direction indicators not working |1.5.1c| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Horn not working |1.7.3a| | 6 |
Nearside Front Direction indicator not working |1.5.1c| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Offside Front Direction indicator not working |1.5.1c| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Offside Rear Direction indicators not working |1.5.1c| | 5 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Nearside Front Footrest insecure |6.2.1a| | 4 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 4 |
Exhaust has part of the system missing |7.1.1a| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 3 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 3 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Direction indicator insecure |1.5.3b| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Offside Handlebar deformed |2.1.1b| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Rear position lamp missing |1.1.1a| | 2 |
Rear All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
An item not tested |Manual| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Nearside Handlebar deformed |2.1.1b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Rear All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 2 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 2 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |