| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Registration plate issues | 8 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Horn not working |1.7.3a| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Centre Rear Upper Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Throttle operating incorrectly cables over adjusted |6.2.1f| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Registration plate lamp issues | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Offside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Rear Direction indicator obviously incorrectly positioned less than 180mm distance between rear indicators (4.4.3 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected Broken cable outer near throttle receiver housing (6.2.7 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |