| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 85 |
| Registration plate issues | 78 |
| Rear reflector on motorcycle missing |1.4.1| | 54 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 41 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 32 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 18 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 13 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 13 |
| Drive chain excessively loose |6.2.1d| | 13 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 13 |
| Horn not working |1.7.3a| | 13 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 12 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 11 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 10 |
| Throttle operating incorrectly |6.2.1f| | 9 |
| Drive chain excessively tight |6.2.1d| | 9 |
| Headlamp aim beam image kick up to the offside |1.6| | 8 |
| Front wheel bearings are excessively rough |2.3.5b| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Nearside Front Direction indicator not working |1.5.1c| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
| Offside Front Direction indicator not working |1.5.1c| | 5 |
| Offside Rear Direction indicator not working |1.5.1c| | 5 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 5 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
| Headlamp incorrect colour |1.2.1| | 5 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 5 |
| Registration plate lamp issues | 5 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Offside Front Direction indicators not working |1.5.1c| | 4 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front position lamp incorrect colour |1.1.2a| | 3 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
| Offside Rear Direction indicators not working |1.5.1c| | 3 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |