| Most common failures | No# failures |
|---|
| Registration plate issues | 24 |
| Headlamp aim out of alignment | 23 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 14 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Rear reflector on motorcycle missing |1.4.1| | 12 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Drive chain worn to excess |6.2.1e| | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 5 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Horn not working |1.7.3a| | 3 |
| Offside Front Direction indicator insecure |1.5.3b| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Offside Front Brake disc contaminated |1.1.14 |b|| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Front Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Front Position lamp not working |4.2.1 |a|| | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front suspension has inadequate damping effect. front forks reach limit easily which may cause damage to brake components. this also will cause handling issues under heavy braking. |2.3.6c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Front Brake disc contaminated fork oil on disc. |1.1.14 |b|| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Front Brake hose excessively kinked |3.2.B3a| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| An item not tested |Manual| | 1 |
| Offside Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake switch |1.3.1a| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Centre Upper Riders seat insecure |6.2.1a| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Nearside Front Lower Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Rear Lower Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Central Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Offside Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Brake lever cracked |3.1.2c| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Front Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Front Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Offside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Offside Rear Brake cylinder severely corroded |3.2.B1b| | 1 |
| Front Brake cylinder severely damaged |3.2.B1b| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Brake hose damaged | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Centre Lower Rear suspension component loose |2.4.A.1a| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Centre Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Headlamp aim not tested headlamp bulbs not bright enough to show pattern in headlight tester |4.1.2 |b|| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |