Most common failures | No# failures |
---|
Headlamp aim out of alignment | 62 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Registration plate issues | 12 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Front Brake excessively binding |1.2.1 |f|| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Brake locking device missing |3.2.A1e| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 2 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Horn not working |1.7.3a| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Front Brake lever insecure |3.1.2a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Brake component modification unsafe brake hose catching between lock stop |1.1.21 |d| |i|| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Stop lamp damaged and function impaired |1.3.3a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Rear All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Riders seat with a defective supporting structure |6.2.5 |a| |i|| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Stop lamp does not illuminate immediately a brake applies front and rear |1.3.1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake reaction bracket excessively corroded |1.1.15 |b|| | 1 |
Centre Rear position lamp insecure |1.1.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Handlebar handgrip not secure to handlebars. throttle |2.1.1c| | 1 |
Centre Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front suspension assembly component missing Bolt missing |2.3.1| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Headlamp at least one does not illuminate on dipped beam bulb went |1.2.2a|i|| | 1 |
Nearside Indicator switch insecure loose on bars |1.5.4| | 1 |
Offside Handlebar handgrip not secure to handlebars. switch loose on bars |2.1.1c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering front brake lever on screen |2.1.2a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering clutch lever on screen |2.1.2a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front An item not tested |Manual| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Brake component leaking fluid MASTERCYLINDER RES LEAKING |3.2.B4| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Brake excessively binding |1.2.1 |f|| | 1 |
Offside Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Stop lamp does not illuminate immediately a brake applies front |1.3.1a| | 1 |
Handlebar handgrip not secure to handlebars. both |2.1.1c| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Brake hose leaking fluid |3.2.B4| | 1 |
Offside Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake hose bulging under pressure |1.1.12 |d|| | 1 |
Offside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear brake pedal |1.3.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Stop lamp not working brake light switch (4.3.1 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Brake component insecure Brake torque reaction arm fixing bolt. (1.1.21 (c)) | 1 |
Front Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front Stop lamp not working switch (4.3.1 (a) (ii)) | 1 |
Central Rear Lower Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Road spring insecure (5.3.1 (a) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Wheel excessively damaged (5.2.2 (c) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Stop lamp not working front switch defective (4.3.1 (a) (ii)) | 1 |
Rear Brake hose bulging under pressure (1.1.12 (d)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Lower Steering headbearing excessively stiff or notchy bearing excessively notchy (2.2.2 (f) (i)) | 1 |
Offside Rear Brake hose leaking (1.1.12 (c)) | 1 |
Front Position lamp missing (4.2.1 (a)) | 1 |
Front Headlamp not working on main beam Headlamp illuminates but no control so not sure if not working on main or dipped beam, no switch, no pattern. (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working No rear brake light switch either fitted or functioning, front switch works (4.3.1 (a) (ii)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |