Most common failures | No# failures |
---|
Headlamp aim out of alignment | 44 |
Registration plate issues | 29 |
Rear reflector on motorcycle missing |1.4.1| | 18 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Horn not working |1.7.3a| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Horn not working |1.7.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock engine revs when stering turned to right. |2.1.4| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Indicator switch insecure nearside switchgear not fixed in position,needs pegging in position |1.5.4| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Upper Fuel cap sealing washer missing |7.2.2c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Footrest missing |6.2.1a| | 1 |
Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
Offside Rear Direction indicator obscured |1.5.1a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake hose excessively twisted |3.2.B3a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake component insecure |1.1.21 |c|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front An item not tested |Manual| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Horn control defective |1.7.2a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Central Front Brake disc|s| is excessively distorted Front brake discs distorted excessively |3.2.A1m| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
An item not tested |Manual| | 1 |
Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Offside Rear Lower Suspension rod attachment bracket/mounting insecure Rear brake torque arm securing bolt loose and locking pin missing (5.3.3 (a) (i)) | 1 |
Nearside Rear Upper Shock absorber likely to become detached Upper shock absorber mounting bolt loose (5.3.2 (a) (ii)) | 1 |
Offside Rear Upper Shock absorber likely to become detached Upper shock absorber mounting bolt loose (5.3.2 (a) (ii)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Stop lamp not working rear foot pedal control (4.3.1 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |