Most common failures | No# failures |
---|
Headlamp aim out of alignment | 50 |
Registration plate issues | 16 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Front Headlamp aim beam image kick up to the offside |1.6| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Horn not working |1.7.3a| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear suspension component loose |2.4.A.1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 2 |
Drive chain excessively loose (6.2.1d) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Registration plate lamp issues | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Throttle operating incorrectly sticking on full lock |6.2.1f| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected on right hand lock |6.2.7 |a| |ii|| | 1 |
Central Front Upper Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Upper Direction indicator not working |1.5.1c| | 1 |
Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp not working from front brake |4.3.1 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies application |1.3.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Suspension component corroded and seriously weakened fork station has excessive pitting causing the seals to leak (5.3.3 (b) (i)) | 1 |
Stop lamp(s) not working when front brake applied (4.3.1 (a) (ii)) | 1 |
Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a sticking brake (3.3.A1a) | 1 |
Drive chain worn to excess (6.2.1e) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Front position lamp does not illuminate immediately when switched on (1.1.3a) | 1 |
Front Roller brake test indicates a severely juddering brake (3.3.A1b) | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn Swing arm bushes (5.3.4 (a) (i)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Exhaust markings indicating not for road use or similar wording competition use only. (6.1.2 (c)) | 1 |
Rear Brake hose connection leaking (1.1.12 (c)) | 1 |
Stop lamp not working when rear brake is applied (4.3.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle sticking on right hand lock (6.2.7 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Exhaust silencer insecure exhaust hanging strap missing/broken (8.1.1 (b) (i)) | 1 |