Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate issues | 3 |
Front Brake pipe union leaking fluid |3.2.B4| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Offside Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls until after wheel has locked up (4.3.2 (a) (iii)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect dips right (4.1.2 (c)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Central Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Central Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle twists complete switch gear (6.2.7 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |