Most common failures | No# failures |
---|
Headlamp aim out of alignment | 113 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 50 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 47 |
Registration plate issues | 33 |
Horn not working |1.7.3a| | 23 |
Drive chain excessively loose |6.2.1d| | 22 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 20 |
Throttle operating incorrectly |6.2.1f| | 19 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 19 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 18 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
Front wheel bearings have excessive free play |2.3.5b| | 14 |
Drive chain worn to excess |6.2.1e| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Headlamp aim beam image kick up to the offside |1.6| | 11 |
Drive chain excessively tight |6.2.1d| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Front Brake excessively binding (1.2.1 (f)) | 9 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 8 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 6 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 6 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
Position lamp switch insecure |1.1.4b| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Indicator switch insecure |1.5.4| | 5 |
Front Hydraulic brake control feels spongy |3.1.4a| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Drive chain excessively loose |6.1.7 |c| |i|| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Rear Brake excessively binding |1.2.1 |f|| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Horn not working |1.7.3a| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp incorrect colour |1.2.1| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Headlamp switch insecure |1.2.4| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Registration plate lamp issues | 2 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Throttle operating incorrectly |6.2.1f| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Front Valve stem seriously damaged |5.2.3 |j|| | 2 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 2 |
Fuel system component leaking |6.1.3 |b| |i|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
Horn not working (7.7 (a)) | 2 |