| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 12 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Registration plate issues | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Horn not working |1.7.3a| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Upper Fuel pipe leaking |7.2.1a| | 1 |
| Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Centre Front Lower Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Steering control handlebar movement restricted by taut cables throttle cable |2.1.2c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Offside Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Centre Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Brake lever attachment screws loose |3.1.2b| | 1 |
| Rear Brake pedal mounting cracked . |3.1.2c| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |