Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Registration plate issues | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Registration plate lamp issues | 5 |
Horn not working |1.7.3a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Throttle operating incorrectly |6.2.1f| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Indicator switch insecure |1.5.4| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Sidecar suspension has an insecure unit. |5.2.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Offside Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases Leaking from silencer to pipe joint. |6.1.2 |a|| | 1 |
Offside Rear Exhaust has a major leak of exhaust gases Leaking from silencer to pipe joint. |6.1.2 |a|| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Horn not working |1.7.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Fuel system component insecure tank |7.2.1b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake hose damaged | 1 |
Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front position lamp incorrect colour |1.1.2a| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Brake excessively binding wheel bearing not checked (1.2.1 (f)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |