Most common failures | No# failures |
---|
Registration plate lamp issues | 17 |
Headlamp aim out of alignment | 13 |
Registration plate issues | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Throttle operating incorrectly throttle sticks on right lock |6.2.1f| | 1 |
Horn control not functioning. button works sometimes but not every time |1.7.2b| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Rear Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Dipswitch does not operate immediately when selected on dipped beam no dipped beam headlights |4.1.3 |b|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Stop lamp not working when operating front brake (4.3.1 (a) (ii)) | 1 |
Upper Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Central Front Stop lamp does not illuminate by the operation of both brake controls Front brake light switch replaced as did not illuminate rear brake light (4.3.2 (a) (iii)) | 1 |
Central Front Horn not working Horn replaced as did not sound (7.7 (a) (ii)) | 1 |
Central Front Inner Horn not working horn insecure not working, have tightened up to correct (7.7 (a) (ii)) | 1 |
Offside Front Upper Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle sticking on right hand lock (6.2.7 (a) (ii)) | 1 |
Central Rear Lower Wheel bearing play so excessive that directional control is impaired rear wheel bearing has excessive play (5.1.3 (a) (ii)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Valve stem seriously damaged split (5.2.3 (j)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |