Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Registration plate lamp issues | 12 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Registration plate issues | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Headlamp aim so that beam "kick up" is not visible on the screen No recognisable Beam Pattern |1.6.B.1| | 1 |
Offside Headlamp aim so that beam "kick up" is not visible on the screen No recognisable Beam Pattern |1.6.B.1| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake disc|s| excessively worn under 5mm-4.5mm thick |3.2.A1l| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
An item not tested |Manual| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Steering linkage locking device missing (2.1.3 (d)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Handlebar grip insecure to handlebar L/H Heated Grip (2.2.1 (d) (ii)) | 1 |
Shock absorber has a serious fluid leak R/H Fork leaking (5.3.2 (b)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |