Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Registration plate lamp issues | 12 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Horn not working |1.7.3a| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Registration plate issues | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Front All position lamps not working |4.2.1 |a|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Suspension rod modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride split pin missing from rear wheel nut now replaced at time of mot |6.2.1h| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. nearside handgrip spinning |2.1.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Front Floor brake test indicates a binding brake (3.3.C2c) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Offside Front Upper Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength Rear brake disc fitted is suspected to be the incorrect size reducing braking ability by approximately 50% as only half the pad is contacting the disc |3.1.5| | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Exhaust has a major leak of exhaust gases exhaust collector at centre of exhaust corroded (6.1.2 (a)) | 1 |