Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Drive chain excessively loose |6.2.1d| | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Registration plate issues | 7 |
Throttle operating incorrectly |6.2.1f| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Horn not working |1.7.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock Right lock |2.1.4| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Outer Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Nearside Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Fork yoke insecure Top steering stem nut loose (2.2.2 (d) (i)) | 1 |
Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail Sprocket carrier bearing excess play (6.1.7 (c) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |