Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Horn not working |1.7.3a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Registration plate issues | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front An item not tested |Manual| | 1 |
Indicator switch defective |1.5.4| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Brake hose excessively deteriorated | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Nearside Upper Fuel system component leaking (7.2.1a) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking/tight to turn, not returning (6.2.7 (a) (ii)) | 1 |