Most common failures | No# failures |
---|
Registration plate issues | 38 |
Rear reflector on motorcycle missing |1.4.1| | 35 |
Headlamp aim out of alignment | 25 |
Registration plate lamp issues | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Horn not working |1.7.3a| | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Inner Direction indicators not working |1.5.1c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Upper Rear mono-shock insecure |2.4.B.4| | 1 |
Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Brake component inadequately mounted |1.1.21 |c|| | 1 |
Front Brake component insecure |1.1.21 |c|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain adjuster |6.2.1h| | 1 |
Rear position lamp adversely affected by the operation of another lamp indicators |1.1.3b| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear suspension bush has excessive free play shock top bush |2.4.A2a|i|| | 1 |
Offside Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Stop lamp not working with foot brake pedal |4.3.1 |a| |ii|| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies from control two |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Handlebar handgrip missing |2.1.1c| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Nearside Front Footrest insecure Footrest turns but is secure as locking pin fitted |6.2.12 |a|| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Front Brake performance not tested |1.2.1 |g|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Offside Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Stop lamp not working control 1 and 2 (4.3.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Brake master cylinder insecure fluid bottle loose (1.1.10 (c)) | 1 |
Nearside Front Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Front Brake cylinder damaged (1.1.16 (a) (i)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Central Front Lower Valve stem seriously damaged (5.2.3 (j)) | 1 |
Central Rear Lower Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Rear Motorcycle structure has excessive corrosion which adversely affects braking or steering rear suspension linkage seized (6.1.1 (c) (ii)) | 1 |
Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |