Most common failures | No# failures |
---|
Headlamp aim out of alignment | 23 |
Registration plate issues | 21 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 17 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Riders seat insecure |6.2.1a| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Registration plate lamp issues | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Hazard warning switch missing |1.4.B.1d| | 2 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Hazard warning lamps not fitted |1.4.B.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear parking brake recording little or no effort | 2 |
Centre Lower Exhaust has part of the system missing |7.1.1a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Stop lamp does not illuminate immediately a brake applies hand |1.3.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies foot |1.3.1a| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Parking brake lever is located so that it cannot be satisfactorily operated from the driver`s seat |3.1.3c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Brake cable locking device insecure |3.5.1l| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Lower Rear reflector on motorcycle obscured |1.4.1| | 1 |
Central Front Upper Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Centre Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |tail light| |1.1.3a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp deteriorated and function impaired control one switch |1.3.3a| | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Front Brake component is excessively corroded |3.1.5| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts rubbing exaust |3.2.B2c| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system bolts missing |7.1.1.c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Parking brake lever is not capable of being maintained in operation by direct mechanical action only hydraulic handbrake fitted |1.1.6 |f|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Hazard warning switch inoperative hazards not fitted |4.4.2 |a| |ii|| | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Offside Front Fuel system component leaking |7.2.1a| | 1 |
Rear All position lamps not working Tail light (4.2.1 (a)) | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Rear Upper Direction indicators not working |1.5.1c| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Position lamp showing red light to the front (4.2.3 (a) (ii)) | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Seat insecure Back rest bolts missing. |6.2.1a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Front brake caliper securing device loose |3.5.1j| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Stop lamp missing |1.2.1a| | 1 |
Nearside Rear Stop lamp missing |1.2.1a| | 1 |
Nearside Front Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Front Front position lamp|s| missing |1.1.A.3a| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |