| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 23 |
| Registration plate lamp issues | 12 |
| Registration plate issues | 11 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Steering stem nut loose |6.2.1h| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Drive belt pulley excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake master cylinder insecure (1.1.10 (c)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Steering linkage locking device missing |2.1.3 |d|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Wheel hub worn to the extent that wheel security is adversely affected wheel nut locking pin missing. |5.2.1 |b| |ii|| | 1 |
| Offside Rear Direction indicator incorrect colour indicator lens missing |4.4.3 |a|| | 1 |
| Central Front Inner Horn not working Horn Inoperative - wires not connected - reconnected (7.7 (a)) | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies bulb blown, now replaced |1.3.1a| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear Lower Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp not working front switch |4.3.1 |a| |ii|| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |