Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate issues | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Headlamp insecure |1.2.3b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Nearside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear suspension component excessively corroded. Swinging arm. |2.4.A.1a| | 1 |
Rear shock absorber has inadequate damping effect. Both shock absorbers |2.4.A.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Registration plate lamp issues | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Drive belt excessively loose. |6.2.1d| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Outer Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Decelerometer brake test indicates a severely juddering brake |3.3.E1e| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Outer Front Lower Front position lamp does not face the front |1.1.1d| | 1 |
Outer Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Inner Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Lower Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Inner Front Lower Front position lamp damaged and function impaired |1.1.1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |