Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Rear reflector on motorcycle missing |1.4.1| | 11 |
Registration plate issues | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Horn not working |1.7.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Direction indicators not working |1.5.1c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
Central Front Headlamp aim not tested (4.1.2 (b)) | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
Steering operation impeded by a leg shield FRONT FENDER (2.1.4 (e)) | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
Chain guard insecure |6.1.7 |i|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Registration plate lamp issues | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Central Rear Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Central Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake performance not tested |3.3| | 1 |
Brake pipe excessively corroded | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
All direction indicators adversely affected by the operation of another lamp Headlight switch effects indicator operation. (4.4.3 (b)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Upper All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |