| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 20 |
| Rear reflector on motorcycle missing |1.4.1| | 15 |
| Registration plate issues | 9 |
| Headlamp aim beam image kick up to the offside |1.6| | 7 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Nearside Rear Direction indicators not working |1.5.1c| | 4 |
| Offside Rear Direction indicators not working |1.5.1c| | 4 |
| Horn not working |1.7.3a| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Vehicle identification number obviously falsified (0.2 (b)) | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Registration plate lamp issues | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Central Fuel hose leaking At Carb (6.1.3 (b) (i)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Central Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Front Brake cylinder leaking master. (1.1.16 (b) (i)) | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake master cylinder insecure (1.1.10 (c)) | 1 |
| Upper Fork yoke fractured (2.2.2 (d) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Footrest missing (6.2.12 (a)) | 1 |
| Offside Front Direction indicator incorrect colour lens missing |1.5.1b| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Front suspension assembly component missing |2.3.1| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Upper Rear suspension component loose |2.4.A.1a| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Offside Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Rear Lower Rear mono-shock insecure |2.4.B.4| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Upper Fork yoke insecure (2.2.2 (d) (i)) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Stop lamp insecure |1.3.3b| | 1 |
| Suspension attachment bracket/mounting insecure Bolt loose (5.3.3 (a) (i)) | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Brake lever is inoperative |3.1.3c| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |