| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 59 |
| Rear reflector on motorcycle missing |1.4.1| | 57 |
| Registration plate issues | 42 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 22 |
| Drive chain excessively loose |6.2.1d| | 22 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 18 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 16 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Steering headbearing has excessive free play |2.2.2| | 16 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 15 |
| Drive chain worn to excess |6.2.1e| | 15 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 14 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 12 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 11 |
| Rear Wheel spoke excessively loose |4.2.1b| | 10 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 10 |
| Horn not working |1.7.3a| | 10 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 9 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 7 |
| Nearside Rear Direction indicator not working |1.5.1c| | 7 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 7 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 6 |
| Rear Wheel spoke missing |4.2.1b| | 6 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 6 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 5 |
| Rear Drive chain worn to excess |6.2.1e| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 5 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 5 |
| Offside Rear Direction indicator insecure |1.5.3b| | 4 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 4 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 4 |
| Front Wheel spoke excessively loose |4.2.1b| | 4 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 4 |
| Horn is not a constant note |1.7.3c| | 4 |
| Rear Footrest missing |6.2.1a| | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 4 |
| Offside Rear Footrest missing |6.2.1a| | 4 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
| Nearside Rear Direction indicators not working |1.5.1c| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 3 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Fuel system component insecure |7.2.1b| | 3 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 2 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Direction indicator not working |1.5.1c| | 2 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
| Offside Rear Footrest missing (6.2.12 (a)) | 2 |
| Front suspension assembly component loose |2.3.1| | 2 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
| Nearside Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear mono-shock pivot seized |2.4.B.4| | 2 |
| Nearside Rear Direction indicator missing |1.5.1a| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Brake pedal insecure |3.1.2a| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Footrest insecure locking pin missing |6.2.12 |a|| | 1 |
| Stop lamp not working front lever |4.3.1 |a| |ii|| | 1 |
| Direction indicator missing both front |4.4.1 |a| |ii|| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Front Front wheel spindle loose |2.3.5a| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Outer Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Wheel spoke cracked. |4.2.1b| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Footrest missing |6.2.1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Offside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Centre Riders seat insecure |6.2.1a| | 1 |
| Lower Drive chain worn to excess |6.2.1e| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp not working front switch (4.3.1 (a) (ii)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Footrest missing |6.2.1a| | 1 |
| Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Front Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
| Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies not working |1.3.1a| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Rear Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
| Rear Brake back plate insecure (1.1.14 (d)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Fuel tank so insecure there is a risk of fire (6.1.3 (a) (ii)) | 1 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Direction indicator missing all |1.5.1a| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Rear Position lamp lens seriously defective missing (4.2.1 (b)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen on offside (4.1.2 (a)) | 1 |
| Rear Footrest missing both (6.2.12 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Rear Footrest missing both |6.2.12 |a|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Stop lamp not working front brake |4.3.1 |a| |ii|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen on off side |4.1.2 |a|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Rear Brake component leaking fluid |3.2.B4| | 1 |
| Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Motorcycle structure adversely modified |6.1.1b| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Vehicle identification number not displayed (0.2 (a)) | 1 |
| Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link wrong |6.2.1h| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Drive belt guard insecure |6.2.1c| | 1 |
| Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Lower Suspension component pin or bush excessively worn Dog Bone (5.3.4 (a) (i)) | 1 |
| Offside Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| An item not tested |Manual| | 1 |
| Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Rear Suspension rod modified so the suspension is inoperative Insufficient movement in rear suspension |5.3.3 |c| |ii|| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Brake hose which buldges |3.2.B4| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Brake cylinder severely damaged |3.2.B1b| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Rear Suspension component pin or bush excessively worn lower linkage |5.3.4 |a| |i|| | 1 |
| Handlebar handgrip missing |2.1.1c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Fuel tank leaking Fuel Tap (6.1.3 (b) (i)) | 1 |
| Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Brake performance not tested |3.3| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Brake component leaking fluid |3.2.B4| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Stop lamp not working front brake stop lamp switch not working (4.3.1 (a) (ii)) | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Inner Rear Brake component is excessively corroded |3.1.5| | 1 |
| Inner Front Brake component is excessively corroded |3.1.5| | 1 |
| Inner Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Inner Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Front Headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Brake pedal attachment screws missing. |3.1.2b| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear suspension bush has excessive free play bottom shock mount |2.4.A2a|i|| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Fairings insecure and likely to impede the steering fuel tank loose and side scoop fairings loose |2.1.2e| | 1 |
| Stop lamp affected by the operation of another lamp affected by indicators |1.3.2| | 1 |
| Rear position lamp insecure screw missing |1.1.1c| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride battery box missing battery insecure |6.2.1h| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Drive chain excessively loose |6.2.1d| | 1 |
| Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |