| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 61 |
| Rear reflector on motorcycle missing |1.4.1| | 48 |
| Registration plate issues | 42 |
| Drive chain excessively loose |6.2.1d| | 24 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 18 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 16 |
| Drive chain worn to excess |6.2.1e| | 16 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 16 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 14 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 12 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Horn not working |1.7.3a| | 11 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 11 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 11 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
| Nearside Rear Direction indicator not working |1.5.1c| | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 9 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 8 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 8 |
| Steering headbearing has excessive free play |2.2.2| | 8 |
| Drive chain excessively tight |6.2.1d| | 7 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 5 |
| Offside Rear Footrest missing |6.2.1a| | 5 |
| Nearside Rear Footrest missing |6.2.1a| | 5 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Rear Footrest missing |6.2.1a| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Nearside Rear Direction indicators not working |1.5.1c| | 4 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 4 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 4 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Handlebar deformed |2.1.1b| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 3 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 3 |
| Offside Rear Footrest missing (6.2.12 (a)) | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Horn is not continous or uniform |1.7.3c| | 3 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 3 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
| Rear wheel spindle loose |2.4.A.2b| | 2 |
| Rear Wheel spoke missing |4.2.1b| | 2 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Vehicle identification number not permanently displayed |6.3.5a| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Registration plate lamp issues | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Rear Direction indicators not working |1.5.1c| | 2 |
| Rear suspension component seized |2.4A2a|ii|| | 2 |
| Front Wheel spoke excessively loose |4.2.1b| | 2 |
| Rear position lamp incorrect colour |1.1.2b| | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear position lamp obscured more than 50% |1.1.1d| | 2 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Offside Rear Direction indicator insecure |1.5.3b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| An item not tested |Manual| | 2 |
| Direction indicators not working |1.5.1c| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Direction indicator missing All indicators missing |1.5.1a| | 1 |
| Footrest missing Both Pillion foot rests missing |6.2.1a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Clutch lever bent so it cannot be readily operated. broken |6.2.1g| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Fuel system component insecure tank |7.2.1b| | 1 |
| Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Suspension arm pin or bush excessively worn swing arm mounting bushes (5.3.4 (a) (i)) | 1 |
| Chain guard insecure (6.1.7 (i)) | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Upper All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Fuel system component leaking Tap |7.2.1a| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Headlamp missing |1.2.3a| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Brake component has an inadequate repair |3.1.5| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Nearside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Central Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Nearside Rear Wheel fixing missing |single fixing| |5.2.1 |a| |ii|| | 1 |
| Front Steering operation linkage fouling when handlebars turned from lock to lock wiring on front need secured |2.1.4 |a|| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Offside Rear Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Rear Brake component is excessively corroded |3.1.5| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Nearside Fuel tank leaking |7.2.1a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Wheel fractured hub (5.2.2 (a)) | 1 |
| Nearside Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear suspension component loose swing arm spindle loose |2.4.A.1a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Lower Rear reflector on motorcycle missing no number plate lamp. |1.4.1| | 1 |
| Rear Stop lamp not working brake pedal (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Rear Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
| Nearside Front Indicator switch insecure |1.5.4| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected split pin missing (5.2.1 (c) (ii)) | 1 |
| Handlebar handgrip not secure to handlebars. both |2.1.1c| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies control 1 |1.3.1a| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Upper Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Upper Direction indicator not working |1.5.1c| | 1 |
| Centre Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Centre Front Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear position lamp does not face the rear |1.1.1d| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Brake hose excessively kinked |3.2.B3a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Front Motorcycle structure adversely modified |6.1.1b| | 1 |
| Rear Motorcycle structure adversely modified |6.1.1b| | 1 |
| Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working both levers (4.3.1 (a) (ii)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain sprocket worn to excess both (6.1.7 (c) (i)) | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Direction indicator missing front and rear.
|1.5.1a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Fuel system component leaking carburettor. |7.2.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies front/rear. |1.3.1a| | 1 |
| Footrest missing both |6.2.1a| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Front Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake hose damaged | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Upper Direction indicator missing |1.5.1a| | 1 |
| Offside Front Upper Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Upper Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Upper Direction indicator missing |1.5.1a| | 1 |
| Offside Front Upper Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Rear Upper Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Offside Inner Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Handlebar handgrip not secure to handlebars. Both |2.1.1c| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Centre Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| All direction indicators not working not flashing at all (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Suspension component pin or bush excessively worn Linkage bush, under main swing-arm pivot (5.3.4 (a) (i)) | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Nearside Front All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Front Horn is not continous or uniform |1.7.3c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Rear Suspension component pin or bush excessively worn swingarm bushes (5.3.4 (a) (i)) | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride sprocket bolt snapped |6.2.1h| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake component leaking fluid |3.2.B4| | 1 |
| Brake performance not tested |3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |