| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 19 |
| Headlamp aim out of alignment | 12 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 6 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Registration plate issues | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
| Rear Footrest missing |6.2.1a| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp does not illuminate immediately a brake applies On front brake switch faulty |1.3.1a| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Brake master cylinder insecurely mounted bolt missing |3.2.B1a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Fuel system component insecure fuel tank insecure and damaged |7.2.1b| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Wheel spoke missing |4.2.1b| | 1 |
| Brake cylinder severely corroded |3.2.B1b| | 1 |
| Front Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Outer Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Inner Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Inner Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Headlamp aim beam image kick up to the offside tape on lens |1.6| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Central Front Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Offside Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Rear Brake caliper has no reserve travel and braking performance affected Rear brake caliper slide seized pulling caliper off disc causing excessive travel |1.1.16 |e| |ii|| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Horn not working |1.7.3a| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Suspension attachment bracket/mounting insecure Upper yoke nut. (5.3.3 (a) (i)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |