Most common failures | No# failures |
---|
Headlamp aim out of alignment | 39 |
Rear reflector on motorcycle missing |1.4.1| | 33 |
Registration plate issues | 27 |
Steering headbearing has excessive free play |2.2.2| | 18 |
Horn not working |1.7.3a| | 18 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 12 |
Drive chain excessively loose |6.2.1d| | 12 |
Horn not loud enough to be heard by another road user |1.7.3a| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Front wheel bearings have excessive free play |2.3.5b| | 9 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 9 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 9 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Drive chain worn to excess |6.2.1e| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear reflector missing (4.8.2 (a) (ii)) | 6 |
Nearside Rear Direction indicator not working |1.5.1c| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 5 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 5 |
Front Hydraulic brake control feels spongy |3.1.4a| | 5 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Rear Footrest missing |6.2.1a| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Front Wheel spoke excessively loose |4.2.1b| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Fuel pipe leaking |7.2.1a| | 3 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
Front position lamp missing |1.1.1a| | 3 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 2 |
Horn sound not in accordance with requirements (7.7 (c)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Front Brake lever insecure (1.1.2 (e) (i)) | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Front wheel spindle loose |2.3.3a| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front wheel spindle loose |2.3.3a| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Registration plate lamp issues | 2 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Nearside Direction indicators not working |1.5.1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Offside Direction indicators not working |1.5.1c| | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
All direction indicators not working |4.4.1 |a| |ii|| | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
All direction indicators adversely affected by the operation of another lamp Indicators work better with lights on, but make the lights flash too. Good battery might help. |4.4.3 |b|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Drive chain horseshoe locking device likely to become detached missing |6.1.7 |j| |ii|| | 1 |
Rear Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Wheel fixing missing |multiple fixings| split pin missing, front wheel nut |5.2.1 |a| |i|| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts hydraulic cable needs re routed |3.2.B2c| | 1 |
Rear Brake pedal cannot be released smoothly brake pedal not releasing when foor taken off |3.1.3d| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Gradient brake test indicates a severely juddering brake |3.3.D1d| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Brake component inadequately mounted front brake hose (1.1.21 (c)) | 1 |
Front Steering linkage locking device missing wheel spindle (2.1.3 (d)) | 1 |
Rear Steering linkage locking device missing wheel spindle (2.1.3 (d)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Horn not working (7.7 (a)) | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Lower Rear mono-shock pivot seized |2.4.B.4| | 1 |
Offside Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake pedal pivots excessively worn Clevis pin excessive play |3.1.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Chain guard insecure No front sprocket gaurd |6.2.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Wheel alignment incorrect which adversely affects the handling front wheel missalined |2.5.1| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Inner Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Offside Motorcycle structure excessively distorted |6.1.1a| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Front wheel insecure |4.2.3b| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Footrest insecure |6.2.1a| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Brake component leaking fluid bleed nipple leaking |3.2.B4| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Lower Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Fork yoke insecure (2.2.2 (d) (i)) | 1 |
Rear Suspension component has excessive wear or free play lower linkage (5.3.3 (d)) | 1 |
Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Fuel tank so insecure there is a risk of fire (6.1.3 (a) (ii)) | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Brake component is severely distorted |3.1.5| | 1 |
Footrest missing |6.2.1a| | 1 |
Nearside Front Brake lever attachment screws missing |3.1.2b| | 1 |
Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
Offside Front Footrest insecure |6.2.12 |a|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Nearside Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp tail light brighter than stop light |1.3.2| | 1 |
Offside Front Lower Motorcycle structure cracked |6.1.1a| | 1 |
Offside Front Footrest insecure split pin missing |6.2.1a| | 1 |
Nearside Front Footrest insecure split pin missing |6.2.1a| | 1 |
Front Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Nearside Handlebar handgrip missing |2.1.1c| | 1 |
Brake hose excessively deteriorated | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Front Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Rear Upper Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |