| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 14 |
| Registration plate issues | 10 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Rear Wheel spoke excessively loose |4.2.1b| | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front wheel bearings are excessively tight |2.3.5b| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Stop lamp not working from either control |4.3.1 |a| |ii|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Brake hose damaged | 1 |
| Front Brake hose excessively kinked |3.2.B3a| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Brake performance not tested |3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Brake cylinder inadequately mounted (1.1.16 (c) (i)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Central Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Stop lamp not working on hand operated brake lever (4.3.1 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Registration plate lamp issues | 1 |
| Offside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp not working not working from either front or rear levers (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake excessively binding 20kgf effort recorded with no brake applied (1.2.1 (f)) | 1 |
| Rear Outer Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Front Brake cylinder insecure master cylinder/ lever clamp loose (1.1.16 (c) (i)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies not working with front brake lever |1.3.1a| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Footrest missing |6.2.1a| | 1 |