Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Registration plate issues | 17 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Horn not working |1.7.3a| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Registration plate lamp issues | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Offside Rear Footrest missing |6.2.1a| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front Wheel spoke excessively loose |4.2.1b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Nearside Front Direction indicator insecure |1.5.3b| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Brake hose damaged | 2 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Lower Rear mono-shock pivot seized |2.4.B.4| | 1 |
Offside Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride split pin broken |6.2.1h| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Outer Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear An item not tested |Manual| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Wheel fixing loose |multiple fixings| Adjuster nuts loose |5.2.1 |a| |i|| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Brake hose leaking fluid |3.2.B4| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear Wheel fixing missing |single fixing| split pin |5.2.1 |a| |ii|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Brake hose excessively deteriorated | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Position lamp adversely affected by the operation of another lamp additional front lamps not projecting a steady light (4.2.3 (b)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected when turning handlebars (6.2.7 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Offside Rear Lower Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen dip beam (4.1.2 (a)) | 1 |
Rear Wheel fixing missing (single fixing) R clip missing (5.2.1 (a) (ii)) | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Stop lamp not working With front brake |4.3.1 |a| |ii|| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Lower Suspension arm ball joint likely to become detached shock lower bolt loose (5.3.4 (a) (ii)) | 1 |
Rear Lower Suspension arm ball joint excessively worn shock mount bolt loose so cannot check bush correctly (5.3.4 (a) (i)) | 1 |
Steering operation restricted in free movement from lock to lock taut on speedo cable (2.1.4 (c)) | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Nearside Front Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Upper Riders seat insecure |6.2.1a| | 1 |
Outer Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Front Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |