Most common failures | No# failures |
---|
Registration plate issues | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Horn missing |1.7.1| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Headlamp aim out of alignment | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Horn missing |1.7.1| | 2 |
Brake hose damaged | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Suspension arm pin or bush excessively worn Rear shock linkage (5.3.4 (a) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Centre Front Upper All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Lower Wheel spoke excessively loose |4.2.1b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Registration plate lamp issues | 1 |
Stop lamp deteriorated and function impaired only 50 % working |1.3.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Horn not working wire broken |1.7.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp not working on dipped beam Headlamp only on one setting-no dip switch (4.1.1 (a) (ii)) | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Suspension arm pin or bush excessively worn Swing arm (5.3.4 (a) (i)) | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Suspension component pin or bush excessively worn play in mono shock linkage |5.3.4 |a| |i|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |