Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 10 |
Headlamp aim out of alignment | 8 |
Registration plate issues | 7 |
Horn not working |1.7.3a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Stop lamp emits other than a steady red light |1.3.1b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Horn missing |1.7.1| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Registration plate lamp issues | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Front Horn is not a constant note |1.7.3c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Horn missing |1.7.1| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Front Brake component inadequately mounted brake disc mounting bolt missing (1.1.21 (c)) | 1 |
Rear Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
Nearside Footrest insecure (6.2.12 (a)) | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Footrest missing both (6.2.12 (a)) | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Direction indicators not working Both indicators damaged |1.5.1c| | 1 |
Front Direction indicators flashing more than 120 times per minute Both indicators operating incorrectly |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Throttle operating incorrectly Sticking |6.2.1f| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Horn not working missing |7.7 |a| |ii|| | 1 |
Headlamp not working on main beam no main beam function |4.1.1 |a| |ii|| | 1 |
Stop lamp switch with a delay in operation affected by position lamp |4.3.2 |a| |ii|| | 1 |
Stop lamp light intensity significantly reduced affected by position lamp operation |4.3.3 |a| |ii|| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected catching on guard (1.1.2 (b) (ii)) | 1 |
Central Shock absorber has negligible damping effect not damping at all (5.3.2 (b)) | 1 |
Front Wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Wheel spindle loose Maybe wheel bearings CHECK! |5.2.1 |c| |i|| | 1 |
Rear Brake caliper inadequately mounted |1.1.16 |c| |i|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Brake hose damaged | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |